13. Firmware Management Utility
13.1 Downloading the Firmware
To download the firmware:
1
From a computer that is not part of your KVM installation, go to tripplite.com and choose the model name that
relates to your device. A list of available firmware appears.
2
Choose the firmware that you wish to install (usually the most recent) and download it to your computer.
13.2 Preparation
To prepare for the firmware upgrade, do the following:
1
Use the Firmware Upgrade Cable provided with this unit to connect a COM port on your computer to the Firmware
Upgrade Port of your switch.
2
Shut down all computers on the KVM installation.
3
From your KVM switch console, login to the OSD as the administrator (see 9.1 OSD Login) and select the F4
Admin function.
4
Scroll down to Firmware Upgrades. Press [Enter], then press [Y] to invoke Firmware Upgrade mode (refer to
"Firmware Upgrade" in the table in section 9.6.4 F4: Admin for details).
Or
Invoke the Firmware Upgrade mode using RS-232 command (see 12.4.11 Firmware Upgrade).
Firmware Upgrade Cable
55