Tripp Lite NetDirector B024-H4U16 Owner's Manual page 29

9. OSD Operation
Setting
Scan Duration
Scan/Skip Mode
Screen Blanker
Hotkey Command Mode
Hotkey
OSD Language
Function
Determines how long the focus dwells on each port as it cycles through the selected
ports in Auto Scan mode (see 9.6.7 F7: Scan). Key in a value from 1 to 255 seconds,
then press [Enter].
Default is 5 seconds; a setting of 0 disables the SCAN function.
Note: We recommend to set the scan duration to 10 seconds.
Selects which computers will be accessed under skip mode (see 9.6.5 F5: SKP), and
Auto Scan mode (see 9.6.7 F7: Scan). Choices are:
ALL - All the ports which have been set accessible.
QUICK VIEW - Only those ports which have been set accessible and have been
selected as quick view ports.
POWERED ON - Only those ports which have been set accessible and are powered on.
QUICK VIEW + POWERED ON - Only those ports which have been set accessible and
have been selected as quick view ports and are powered on. The default is ALL.
Note: The quick view choices only appear on the administrator's screen, since only the
adminstrator has Quick View setting rights.
If there is no input from the console for the amount of time set with this function, the
screen is blanked. Key in a value from 1 to 30 minutes, then press [Enter]. The default
setting of 0 disables this function. The screen will be blanked in the amount of time set
(counting from the moment when OSD is closed).
Enables / disables the hotkey command function in case a conflict with programs
running on the computers occurs.
Sets the keyboard shortcut for invoking Hotkey Mode (see 10.2 Hotkey Setting Mode).
Choices are: [NUM LOCK] + [-] (minus) (default), and [CTRL] + [F12].
Sets the language used in the OSD. Choices are: English (Default), German, Japanese,
Simplified Chinese, Traditional Chinese, Spanish, French and Russian.
29