7. Installation
6
At the other end of the cables from step 5, plug the DisplayPort cable, USB 3.0 cable, and audio cables into their
respective ports on the computer. Repeat steps 5 and 6 for other PC systems you are installing.
7
(Optional) Plug your USB peripherals into the USB Type-A ports in the USB 3.1 Gen1 Peripheral Hub located on
the unit's front panel.
8
Plug the power adapter that came with your switch into an AC power source, then plug the power adapter cable
into the KVM's power jack.
9
Power on the computers.
Note: Make sure all computers and devices connected to the KVM are also properly grounded.
7.3.2 Two-Stage Cascade Installation
To control even more computers, additional KVM switches can be cascaded from the KVM ports of the First Stage unit.
The cascaded KVMs that connect back to the First Stage unit are considered Second Stage units. As many as 128
(B024-H4U08) or 256 (B024-H4U16) computers can be controlled in a complete two-stage installation. Tables showing
the relation between the number of computers and the number of units needed to control them is provided in section
14.1 B024-H4U08 and B024-H4U16 Connection Tables.
7
6
2
USB HDMI
KVM Cable Set
3
4
17
5