F4: Admin - Tripp Lite NetDirector B024-H4U16 Owner's Manual

9. OSD Operation

9.6.4 F4: Admin

Clicking or pressing [F4] activates Admin function. F4 is an administrator-only function. It allows the
administrator to configure and control the overall operation of the OSD. To change a setting, click on the settings item
you want to configure, or use the up and down arrow keys to move the highlight bar to it and press [Enter].
After you select an item, a submenu with further choices appears. Click an item, or move the highlight bar to it then
press [Enter]. A check mark ( √ ) appears before the selected item so that you know which one it is. The settings are
explained in the following table:
30