Local Console Osd F4 Administration (Adm) Page; Reset Station Ids; Firmware Upgrade - Tripp Lite B020-U08-19-IP Owner's Manual

7. Administration

7.1.3 Local Console OSD F4 Administration (ADM) Page

This Administrator-only page allows administrators to configure the settings of the KVM switch. To change a setting:
1) Double-click on it, or highlight it and press the [Enter] key.
2) After you select an item, a submenu with more choices will appear. To make a selection, double-click on a choice or highlight it and press the [Enter]
key.
The settings in the F4 ADM page are explained in the following table:
Setting Description
SET IP This page allows administrators to set the network settings for the B020-U08-19-IP.
ADDRESS DHCP: The first field allows you to enable or disable DHCP. When enabled, the KVM is assigned an IP address by the DHCP server.
This setting is enabled by default. To disable the DHCP setting and set up a fixed IP address, press the [Spacebar] key. Once the
DHCP is disabled, you will be allowed to edit the remaining fields in the SET IP ADDRESS page. In the remaining fields, enter in the IP
Address, Subnet Mask and Default Gateway you want to assign to the KVM switch. When these fields have been populated, press the
[Esc] key to exit and pull up a prompt asking if you wish to save the settings you just entered. If you do not wish to save the settings,
press the [N] key. If you do wish to save the settings, press the [Y] key. Upon pressing the [Y] key, the settings will be saved and the
KVM will be reset.
Note: This page only allows you to set a fixed IP address or enable IP address assignment via DHCP server. It does not allow you to
set the HTTP, HTTPS and Program access ports, assign a DNS server address, or edit the IP Installer settings. To set ports and assign
a DNS server address, you can use the Web Management Interface or Remote OSD. To edit the IP Installer settings, you must use the
Web Management Interface.
SET LOGOUT If there is no input from the console for the amount of time set here, the user will be logged out, requiring them to enter their username
TIMEOUT and password to regain access to the KVM. This can be set from 0 to 180 minutes, with 0 disabling the function. Simply type in the
desired time frame and hit the [Enter] key to save your change. This is disabled (0) by default.
EDIT PORT This function allows administrators to give each port a unique name, making it easier to find the computer you want to access. To add/
NAMES edit a port name, do the following:
1. Select the port by double-clicking on it, or by highlighting it and hitting the [Enter] key.
2. A name field will appear at the bottom of the screen. Add or edit the port name and hit the [Enter] key to save the change. To exit
without saving the change, hit the [Esc] key.
Port names can have a maximum of 12 characters, including any combination of letters and numbers (A-Z, 0-9), and the following
characters: Asterisk [*], Parentheses [()], Plus [+], Minus [-], Colon [:], Comma [,], Question Mark [?], Period [.], Forward Slash [/] and
Space. Port names are NOT case sensitive. They will always display as uppercase in the OSD.
RESTORE This allows the Administrator to restore all OSD settings to their factory default values except for the network settings, port names and
DEFAULT username/passwords. When this function is accessed, a prompt will appear asking if you wish to restore the default settings. If yes, type
VALUES in a Y and hit the [Enter] key. If no, press the [Esc] key to go back to the previous menu.
CLEAR THE This function allows the Administrator to clear all of the port names that have been entered. As with the RESTORE DE FAULT
VALUES, you will be prompted upon accessing this function. If you wish to clear the name list, type in a Y and hit the [Enter] key. If
NAME LIST
not, press the [Esc] key to go back to the previous menu.
ACTIVATE Turns the beeper sound ON or OFF. Type in Y to turn the Beeper sound on, or N to turn it off. You do not need to hit the [Enter] key
BEEPER after typing in Y or N, the change will be made automatically.
SET QUICK Administrators can use this function to mark ports as Quick View ports. This provides a way to customize which ports are displayed in
VIEW PORTS the OSD main menu, and which are accessible in Auto Scan and Skip Modes. To set ports as Quick View ports, do the following:
1. Highlight the desired port and hit the [Enter] key, or click on it using the touchpad.
2. Press the [Spacebar] to toggle Quick View status ON/OFF. An icon will appear in the QV column next to the selected port when
Quick View status is turned on.
Once Quick View ports are set, the OSD main page can be set up to display only Quick View ports, or only Quick View ports that are
powered ON. Administrators can also set it up so that only Quick View ports, or powered on Quick View ports, are accessible in Auto
Scan or Skip Modes.
RESET This function is used when you change the position of one of the KVM stations in a daisy-chain. When you change the posi tion of the
STATION IDs station, the OSD does not recognize the change, and will not automatically update the main menu to display the stations in correct
order. When this function is used, the KVM will scan the entire installation and update the station numbers accordingly. The port
names of the affected stations will be kept; however, you will need to manually update all other settings (SET ACCESSIBLE PORTS,
SET QUICK VIEW PORTS, etc.).
SET This allows the Administrator to set the operating system for the port to match that of the connected computer. To set the operating
OPERATING system, do the following:
SYSTEM 1. Highlight the desired port or click on it using the touchpad.
2. Press the [Spacebar] to toggle between four options; WIN, MAC, SUN and OTHER. Each port is set to WIN by default.
3. You do not need to press the [Enter] key to save this setting.
FIRMWARE Note: The B020-U08-19-IP has two sets of firmware, one to control IP Access and another to control the KVM's Mainboard, Input/
UP GRADE Output Ports and Keyboard. The IP Access firmware must be updated via the Web Management Interface or Remote OSD. The KVM
Mainboard, Input/Output Ports and Keyboard firmware must be updated via the local console OSD.
In order to upgrade the KVM Mainboard, Input/Output Ports and Keyboard firmware, Firmware Upgrade Mode must be invoked via
this setting. (See page 30 for details on performing a firmware upgrade.)
When you select this option, the firmware version numbers are displayed on the OSD screen, and a prompt will ask if you wish to
continue with a firmware upgrade. If yes, type in Y. If no, type in N.
201009236 93-2985.indd 29
( continued )
29
11/18/2010 4:21:42 PM