Table of Contents
Advertisement
:
Warning – Risk of injury!
Incorrect repairs are dangerous. Do not attempt to
repair the appliance yourself. Repairs must only be
carried out by one of our trained after-sales engineers. If
the appliance is defective, call the after-sales service.
:
Warning – Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out and damaged power cables replaced by
one of our trained after-sales technicians. If the
appliance is defective, unplug the appliance from the
mains or switch off the circuit breaker in the fuse box.
Contact the after-sales service.
Fault messages on the display panel
If a fault message (begins with """) appears on the
display panel, e.g. "‹†‹ƒ, touch the r button. This will
reset the fault message. If necessary, reset the time.
If the fault was a one-off, you can continue to use the
appliance as normal. If the fault message appears
again, notify our after-sales service and quote the exact
fault message and the E no. of your appliance.
~ "Customer service" on page 28
Maximum operating time
If the settings are not changed on the appliance for
several hours, the appliance will automatically stop
heating. This prevents the appliance from being left on
when it is not supposed to be.
When the maximum operating time is reached depends
on the settings that have been configured on the
appliance.
Maximum operating time reached
"‰ appears on the display.
Switch off the appliance using the main switch. If
necessary, the settings can be reconfigured.
Tip: To prevent the appliance from switching off when
you do not want it to when your food needs to be
cooked for a very long time, you should always set a
cooking time. The appliance will continue heating until
the set cooking time has elapsed.
Replacing the bulb in the top of the cooking
compartment
If the cooking compartment light bulb fails, it must be
replaced. Heat-resistant, 25 watt, 230 V halogen bulbs
are available from the after-sales service or specialist
retailers.
When handling the halogen bulb, use a dry cloth. This
will increase the service life of the bulb. Only use these
bulbs.
:
Warning – Risk of electric shock!
When replacing the cooking compartment bulb, the
bulb socket contacts are live. Before replacing the bulb,
unplug the appliance from the mains or switch off the
circuit breaker in the fuse box.
:
Warning – Risk of burns!
The appliance becomes very hot. Never touch the
interior surfaces of the cooking compartment or the
heating elements. Always allow the appliance to cool
down. Keep children at a safe distance.
Place a tea towel in the cold cooking compartment
1.
to prevent damage.
Turn the glass cover anti-clockwise to remove it
2.
(figure
).
!
Pull out the bulb – do not turn it (figure
3.
Insert the new bulb, making sure that the pins are in
the correct position. Push the bulb in firmly.
Screw the glass cover back on.
4.
Depending on the appliance model, the glass cover
may have a sealing ring. If the glass cover has a
sealing ring, put it back in place before screwing the
cover back on.
Remove the tea towel and switch on the circuit
5.
breaker.
Trouble shooting
en
).
"
27
Advertisement
Table of Contents
