Table of Contents
Advertisement
Set the cooking time in the settings area.
3.
Touch the t sensor.
4.
The oven starts heating after a few seconds. The
x, Š symbols and the ª temperature display appear in
the display panel. The different segments of the
progress bar become lighter and lighter as the time
elapses. To display the remaining time, touch the r
sensor twice.
The time has elapsed
An audible signal will sound. The oven will stop heating.
The time will be zero on the display panel.
Touch any button to stop the audible signal. Once the
audible signal has stopped, you can set a new cooking
time in the settings area.
When your food is ready, switch off the oven using the
main switch #.
Changing and cancelling
The cooking time can be changed at any time. To do
this, touch the r sensor twice and change the time in
the settings area. The change is applied after a few
seconds.
To cancel, set the cooking time to zero in the settings
area. The oven continues to heat without a set cooking
time.
Setting the end time
You can delay the time at which cooking is due to
finish. You can, for example, put your food in the oven
in the morning and set the cooking time so that it is
ready at lunchtime.
Notes
Make sure that food is not left in the oven for too
■
long as it may spoil.
Set the end time while the oven is still cold.
■
Do not adjust the end time once the appliance is
■
already in operation, as this may affect the cooking
result.
The end of the cooking time can be delayed by up to
23 hours 59 minutes.
Example in the picture: The time is 10.30 a.m., a
cooking time of 45 minutes has been set and you want
the food to be ready at 12.30 p.m.
Set the heating function and temperature or grill
1.
setting.
Touch the r sensor twice and set the cooking time
2.
in the settings area.
Touch the r sensor again.
3.
A A : A A appears in the display panel and the
y symbol lights up.
Set the end time in the settings area.
4.
Touch the t sensor.
5.
After a few seconds, the oven will apply the settings.
The end time and the Q x and y symbols will appear
on the display panel. The Á arrow will point to the
y symbol.
The time has elapsed
An audible signal will sound. The oven will stop heating.
The time will be zero on the display panel.
Touch any button to stop the audible signal. Once the
audible signal has stopped, you can set a new cooking
time in the settings area.
When your food is ready, switch off the oven using the
main switch #.
Changing and cancelling
You can change the end time in the settings area. After
a few seconds, the change will be applied. The end
time cannot be changed once the cooking time has
already started to count down, otherwise the cooking
result may no longer be satisfactory.
To cancel, set the end time to the current time of day
plus the cooking time. The appliance will start to heat
and the cooking time will start to count down.
Time-setting options
en
17
Advertisement
Table of Contents
