Basic Settings; List Of Basic Settings; Changing The Basic Settings - Blaupunkt 5B49M8 Series Instruction Manual

Table of Contents

Advertisement

QBasic settings
T here are various settings available to you in order to
B a s i c s e t t i n g s
help use your appliance effectively and simply. You can
change these settings as required.

List of basic settings

Depending on the features of your appliance, not all
basic settings will be available.
Basic setting
Length of audible signal dura-
™‚
tion upon completion of a
cooking time or timer count-
down
Amount of time until a setting
™ƒ
is applied
Button tone that sounds when
™„
a button is touched
Display panel brightness
™...
Display time of day?
™†
Enable childproof lock activa-
™‡
tion?
Interior lighting on when
™ˆ
appliance in operation?
Cooling fan run-on time
™‰
Telescopic rails retrofitted?** ‹ = no* (for rails and single
™Š
Reset all values to factory set-
™›
tings?
* Factory setting (factory settings may vary depending on the appli-
ance model)
** Not available for all appliance types.
--------
Options
‚ = approx. 10 seconds
ƒ = approx. 30 seconds*
„ = approx. 2 minutes
‚ = approx. 3 seconds*
ƒ = approx. 6 seconds
„ = approx. 10 seconds
‹ = off
‚ = on*
‚ = dark
ƒ = medium
„ = bright
‹ = hide the time
‚ = display the time*
‹ = no
‚ = yes*
ƒ = yes, with locked door**
‹ = no
‚ = yes*
‚ = short
ƒ = medium*
„ = long
... = extra long
pull-out system)
‚ = yes (for double and triple
pull-out systems)
‹ = no*
‚ = yes

Changing the basic settings

The oven must be switched off.
Touch the r sensor for approx. four seconds.
1.
The first basic setting appears in the display panel,
e.g. ™‚ ƒ.
Change the setting in the settings area.
2.
Touch the r sensor to confirm.
3.
The next basic setting appears in the display panel.
Touch the r sensor repeatedly to call up all of the
4.
basic settings. Change the settings in the settings
area.
Finally, touch and hold the r sensor again for
5.
approx. four seconds to confirm that you want to use
the settings you have selected.
This applies all the changes to the basic settings.
To exit the basic settings without confirming the
changes, touch the # sensor.
The basic settings can be changed at any time.

Basic settings

en
19

Advertisement

Table of Contents
loading

Table of Contents