Camera Control Methods And System Configurations; Use The Infrared Remote Controller; Use Rs-232 (Visca) - Bolin Technology 2 Series User Manual

Camera Control Methods and System Configurations

This unit has multiple ways of controlling the camera and various system configuration capabilities using optional
products. This section describes the ways of controlling and typical system examples with the required components and
usage of each system.

1. Use the Infrared Remote Controller

2. Use RS-232 (VISCA)

3. Use RS-422/485 (VISCA/PELCO P/D)
4. IP Control (See Network Camera User Manual)
Use the Infrared Remote Controller
To operate the camera from a short distance.
For IR remote control details, refer to Operation Using the Infrared Remote Controller.
Use RS-232 (VISCA)
You can use RS-232 port to connect to optional controllers, such as joystick control keyboard, control PC station, to
operate the camera.
To perform pan/tilt and zoom operations using the joystick of the control keyboard, and to perform the Preset operation
using the control buttons.
An application software that supports this unit is needed if you use PC station.
15