Remote Controller; Cr2032 Coin Lithium Battery Installation; Find The Battery Compartment On The Bottom Of The Remote Controller; Use A Cross Screwdriver To Unscrew, With A Needle, Press And Slide The Battery Tray Out - Bolin Technology VCC-4KHDB-M-11142018 User Manual

Remote Controller

1. Power
2. Camera ID (Total 3) Selector
3. Preset Position (Total 6) Calling and Setting
4. PAN-TILT

Pan and Tilt direction control

HOME: Home position, Resolution reset
5. L/R Direction Set

Left and right orientation setting
6. ZOOM/FOCUS

Far

Near
7. Auto/Manual Focus
8. Back Light
9. Video Format Switching

You can change the video format by keep
pressing the button.
10. MENU

On screen menu display ON/OFF
11. Audio Switch

You can turn the Mic built in the camera Off/ON by
pressing the button once.
12. Fast/Slow Zoom Switching
13. White Balance

Change the White Balance setting by pressing
the button.
14. De-Flicker

When you find the video flicking, press the button
once to eliminate the flickers.
Notes

3V CR2032 Coin lithium Battery is not included with remote controller, you should purchase it at your local market.

3V CR2032 Coin lithium batteries are not interchangeable.
3V CR2032 Coin lithium battery Installation:

1. Find the battery compartment on the bottom of the remote controller

2. Use a cross screwdriver to unscrew, with a needle, press and slide the battery tray out

3. Remove the old battery.

4. With the positive side facing up toward you, put in the CR2032 battery.

5. Slide the battery back into the controller.

9