Table of Contents
Advertisement
Function Menu
Name
System Information This link displays device information and allows you to configure device
Management
PoE
Port
VLAN
Link Aggregation
Port Mirroring
QoS
Rate Limiting
Storm Control
Loop
Detect/Prevent
IGMP Snooping
Password
Logout
V2.0b
The PoE smart switch software provides layer 2 rich
functionality for switches in your network. This chapter
describes how to use the web-based management
interface (Web UI) to configure the switch's features.
name.
You can perform functional maintenance such as firmware or configuration
files, as well as system reset or restart.
You can configure PoE.
You can check the link status, TX/RX counter, loop status and loop reset.
You can configure port-based VLAN or 802.1Q VLAN.
You can logically aggregate links to form a logical, higher bandwidth link.
This link can mirror Ingress/Egress traffic, the packet can mirror to
Destination port and for analysis
You can enable Port-Based QoS or IEEE 802.1p QoS
The rate limiting function can be configured to limit the rate of traffic
received on a particular interface.
You can set up broadcast rate limit on every port.
You can check Loop Detection and Loop Prevention.
You can configure IGMP Snooping.
Change the system login password.
Logout from system.
Function
Advertisement
Table of Contents
