Wds Setup - Cerio OW-400 A1 User Manual

While the No ACK policy helps improve transmission efficiency, it can cause increased packet
loss when communication quality deteriorates. This is because when this policy is used, a
sender does not retransmit packets that have not been received by the recipient.
When the Normal ACK policy is used, the recipient acknowledges each received uncast packet.
Click "Save" button to save your set function. Then click "Reboot" button to activate your
changes.

4.5.5 WDS Setup

Please click on Wireless -> WDS Setup
When the WDS function is enabled, it can be set to use Radio 0
(2.4G) for WDS or Radio 1 (5G) for WDS, etc., and a maximum
of 24 groups can be set up to bridge to 2.4G + 5G + 5G. In WDS
The function supports VLAN tag transmission. If there is a tag
set in the network domain, WDS can bring multiple groups of
tags to another bridge endpoint.
V4.0