Setting The Default Scan List; Deleting Objects - GRE 0716 Owner's Manual

object using the 5-way pushbutton pad. Press
to remove permanent lockout from the talkgroup. Press
then
EDIT, then the CURR softkey to edit and save the TGRP object.

Setting the Default Scan List

By default, your scanner will store all new objects, and objects
found during Search, Tune, and Sweeper as mapped to Scan
List 01.
You can easily change the default Scan List to any Scan List you
specify, including the special FAV and SKYWARN Scan Lists.
Press
down until the Dflt ScanList item appears in the middle of
the display. Enter a new Scan List number to use as the default
Scan List. The following numbers are valid:
0:
1-20: The twenty normal Scan Lists
21:
22:
Press
List value, then press the SAVE softkey to save your changes to
the radio s configuration memory.

Deleting Objects

Objects that you no longer need to use can easily be deleted
from the 0716's memory, making room for new objects.
To delete an object, press
navigate to the object you wish to delete. Press
delete the object. The scanner will ask you to confirm the delete
command before removing the object from the scanner s
memory. Deletions cannot be un-done.
To delete a TSYS, use the FIND feature to search for the TSYS
by name. Press
the FIND softkey, and use the Standard Text Entry Method to
enter all or part of the TSYS name you wish to delete. Press the
OK softkey to begin searching, and, if necessary, press the NEXT
softkey to continue searching until the desired TSYS is located.
0716 User Manual
to delete the TGRP object from the scanner. Press the
CLR
, then the GLOB softkey, and use the
PGM
The "not scanned" (ns) Scan List - objects that have no
Scan List mappings can be found here
The FAV Scan List
The SKYWARN Scan List.
or the Done softkey to store your new default Scan
ENT
, then press the EDIT softkey, then press
PGM
, then use the
PGM
, then
FUNC L/OUT
,
FUNC
key to scroll
keys to
to
FUNC CLR
Page 64