Using Dedicated Limit And Service Search Modes; Lmit Search Mode - GRE 0716 Owner's Manual

LTR home repeater
Motorola analog voice channel
You may wish to use the 0716's Tune LED feature to obtain
a visual indication of signal strength using the tri-color LED. To
activate the Tune LED, press
the
Use the
SAVE softkey to save your changes to the radio s configuration
memory.

Using dedicated Limit and Service search modes

The
search modes of your 0716. Pressing the
through each search mode in this order: Limit, Railroad, Public
Safety, Aircraft, Ham, CB, Marine, and FRS/GMRS/MURS/DOT.

LMIT Search Mode

Your scanner s dedicated LMIT search mode provides you with
the ability to create a limit search with a search frequency range
between upper and lower limit frequencies that you specify and
perform the limit search directly without creating a new LMIT
object. You can then monitor that frequency range for
transmissions.
To enter LMIT mode, press the
repeatedly until the display indicates LMIT search as follows:
0716 User Manual
Trunked Mode
key until Tune LED:
keys to toggle Tune LED on or off, then press the
key provides immediate access to the dedicated
SRCH
Analysis Display
HR:hh A-HH-GGG
where HR=the home repeater number
of the tuned frequency, A-HH-
GGG=the Area, Home Repeater and
Group ID of the LTR talkgroup
VC: lsTGID-nnnnn
where lsTGID shows the decoded
talkgroup ID data from the lowspeed
data stream
Please note that the analog lowspeed
data protocol does not provide error
correction, and some false "VC:
lsTGID" readings should be expected.
, then the GLOB softkey. Press
PGM
Off appears in the display.
SRCH
key on the keypad
SRCH
key cycles
Page 75