GRE 0716 Owner's Manual page 41

CONV and TSYS objects, name your new talkgroup "POLICE
DISPATCH":
7 1
6 3
5 3
4 3
2 3
3 2
.
3 1
4 3
7 4
7 1
2 1
8 1
2 3
4 2
Press
the TGRP as a new object. As with the other object types, there
are many other parameters you can edit for the TGRP, but for
now, that s all you have to do to start monitoring traffic on that
TGRP! To add more TGRPs on the same system, follow the
same steps above, this time specifying the TSYS that you just
created. To create TGRPs on a different system, follow the steps
above, specify a NEW system, and provide the correct
parameters for that system, as shown above.
As a reminder, here are a few important points to remember
about monitoring trunked radio systems, and about TGRP
objects in particular:
With regard to trunked radio systems, it is important to note that
a "system" cannot be scanned. If one wishes to monitor radio
traffic on a trunked radio system, one must create a TGRP
object. A TGRP object includes the parameters for a trunked
radio system so that it will operate properly. Trunking system
(TSYS) parameters are stored as a separate "configuration
object", and can be used over and over again in other talkgroup
objects on the same trunked radio system.
Also with regard to trunked radio systems, it is important to note
that a talkgroup object may be configured in one of four different
0716 User Manual
P
O
L
I
C
E
<space>
D
I
S
P
A
T
C
H
or DONE to store the name, then press SAVE to store
ENT
Page 41