Permanent Lockout - GRE 0716 Owner's Manual

If you wish to remove temporary lockout from a single object,
navigate to the object using the 5-way pushbutton pad while in
Manual Mode or PGM mode and press the
Temporary lockout is a very useful feature. For example, when a
major incident occurs while you are scanning, you may wish to
focus your scanning on that major incident, and exclude
unrelated talkgroups so that radio traffic associated with the
major incident is not interrupted.
You could press the
object, if communications for the major incident are only being
conducted on single channel or talkgroup. More often, several
talkgroups are used to provide communications for major
incidents, so if you park on a single object, you may miss
communications on other objects that are related to the incident
of interest.
By using Temporary Lockout, it is possible to "zoom in" on the
objects that are carrying communications related to the incident
of interest by pressing
becomes active. Eventually you will narrow down your monitoring
to those objects that are being used to provide communications
for the incident you are trying to monitor.

Permanent Lockout

Permanent lockout locks out an object until you explicitly unlock
it. No traffic will be received on the locked out object while
permanent lockout is active.
To apply permanent lockout to an object, press
OUT
operation, or navigate to an object using the 5-way pushbutton
pad while in Manual Mode or PGM mode and press
the
uppercase to indicate that permanent lockout is applied to the
object:
0716 User Manual
PAUSE
L/OUT
key while the scanner is stopped on that object during scan
key. The lowercase "l" in the display changes to
L/OUT
L/OUT
or keys to listen to a single
MAN
every time an unrelated object
FUNC
key again.
, then the
L/
, then
FUNC
Page 61