Mapping Objects To Scan Lists - GRE 0716 Owner's Manual

You can also add any object to the FAV Scan List by pressing the
FUNC
mode, or while parked on the object in MAN and PROGRAM
mode.
It is also possible to clear the FAV Scan List completely by
pressing
the Clear FAV menu item. Press the
for all objects, press the YES softkey to confirm the action, then
press the Save softkey to save your changes.
For example, you may wish to leave the FAV Scan List empty,
and add your favorites while scanning by pressing
FAV
a major event, where you wish to quickly isolate objects of
interest by pressing
pressing
The Favorites Scan List is also useful to group objects that are
very close to where you live, so that when you press the
you are only scanning objects that are in your immediate vicinity,
making the radio less active and increasing the chances that you
will not miss important local activity.
Use your imagination and you will probably come up with many
other ways to use the Favorites Scan List feature.

Mapping Objects to Scan Lists

By default, every new object you create is mapped to be a
member of Scan List 01. Scan List membership is defined in an
object s parameters menu and is typically found at the beginning
of the menu.
To change Scan List membership when creating a new object,
scroll up or down to the Scan Lists: parameter in the object s
menu before saving the object. With the Scan Lists: field
highlighted (as indicated by the blinking cursor), use the
keys on the 5-way pushbutton pad to scroll through the Scan
Lists until you find the Scan List that you wish to enable or
disable membership for the object, and use the
toggle membership for that Scan List on or off. The asterisk (*)
next to the Scan List number indicates that the object is a
member of that Scan List. Press the Save softkey to save the
modified object. Objects can be members of as many Scan Lists
as you see fit, without limitation to the number of Scan Lists an
0716 User Manual
key, then while the object is active during SCAN
FAV
, then the GLOB softkey, then scrolling to down to
PGM
when objects of interest are active. This can be useful during
FUNC FAV
to scan only those objects.
FAV
key to set FAV=NO
SEL
FUNC
when they are active, then
SEL
, then
key,
FAV
button to
Page 56