GRE 0716 Owner's Manual page 100

GLOB
Parameter
Pri Interval
TGRP Pri Int
QuickPriRtn
Search Delay
SRCH Dig AGC
SRCH SuprTrk
TLO=FUNC L/O
DupeChecksSQ
TGID Format
TGRP Ignore
ShowCCInfo
0716 User Manual
Options
2-100 x 100 mS Conventional frequency priority sample interval.
Toggles priority interrupt scanning during trunked
On or Off
calls
When on, does not wait for verification of correct
On or Off CTCSS, DCS or NAC when returning to an active
CONV channel after priority sampling
1-100 x 100 mS Sets wait for reply delay for all search modes
Sets digital AGC mode on or off for all search types.
On or Off Useful to compensate for low or high digital audio
levels caused at the system.
Alternative DSP decoding algorithm is applied to all
On or Off search types. May help reception on some
systems.
Controls the operation of the
pressing
On or Off the selected object. When On, pressing
performs a Permanent Lockout of the selected
object.
If set to Yes, dupe checking will check both the
Yes or No stored frequency and any encoded squelch settings
when checking for duplicate CONV objects.
Norm, DEC or HEX Selects TGID display format
If set to Yes, TGRP wildcards will ignore calls on
Yes or No previously stored TGRPS that are mapped to
disabled Scan Lists.
Displays the Control Channel List # of the active
Yes or No control channel, and receive quality of the control
channel if Multisite=Off for the TSYS
Description
L/OUT
performs a Temporary Lockout of
L/OUT
key. When Off,
L/OUT
Page 100