Searching For Objects Using Find; Filtering By Object Type - GRE 0716 Owner's Manual

in PGM or Manual Mode. Here are some more methods you can
use to find stored objects quickly.

Searching For Objects Using FIND

Your 0716 provides a very useful FIND feature that allows
you to search all objects for a text string that you specify. FIND
searches for your specified text in the following places:
• In TGRP objects, the ID field and the Tag field
• In CONV objects, the Frequency field and the Tag field
• In TSYS, LMIT, SRVC and SWPR objects, the Tag field
To use FIND, press the
Press the FIND softkey, then enter the text string you wish to
search for. Press the OK softkey to begin searching. Press the
Exit softkey to cancel the FIND operation. Press the Qtxt
softkey to use QuickText in your find text screen. For more
information on text entry and QuickText, please see the section
of this manual entitled "Standard Text Entry Method and
QuickText".
Once you have started searching, the radio will stop on any
object where your find text is found in the frequency, tag, or ID
fields as described above.
When the scanner finds a matching object, you may press
to begin monitoring of the found object in Manual mode. You may
also press
the found object position. If you wish to edit the object, press the
EDIT softkey. If you wish to continue searching, press the NEXT
softkey.
FIND keeps the last search text you specified stored so that you
may use it again in subsequent FIND operations.

Filtering By Object Type

When browsing objects in PGM mode, you can filter the objects
that are displayed by their type.
Press the
Press the
Edit softkeys to display the filter softkeys. The filter softkeys are
as follows:
CONV
TGRP
0716 User Manual
keys on the 5-way pushbutton pad while the scanner is
key, then press the EDIT softkey.
PGM
to exit FIND and execute programming tasks at
PGM
key on the keypad, then press the EDIT softkey.
PGM
or keys on the 5-way pushbutton pad to scroll the
MAN
Page 59