Glob Menu Reference - GRE 0716 Owner's Manual

GLOB Menu Reference

The GLOB menu stores all of the radio-wide settings used by the
scanner. The GLOB menu allows you to "tweak" these settings to
your liking. The default settings will work fine for most users, but
most users will want to use the GLOB menu to personalize the
radio to suit their individual tastes. The active parameter is
always the middle parameter and is indicated by a flashing ":".
The entire GLOB menu is shown below. Note that some GLOB
parameter changes do not take effect until the GLOB menu is
saved.
HINT:
GLOB
Parameter
CONTRAST
Owner
Clone Send
Alert Mode
Sound Mode
Key Beeps
Light Mode
Light Area
0716 User Manual
You can restore all GLOB settings to their defaults without affecting
your programmed objects or V-Scanners. Power cycle the radio, then
press , then during the welcome message display. Press
0 2
confirm the GLOB parameter reset.
Options
Sets LCD contrast. Use
1-7
pushbutton pad.
Enters sub menu to set Welcome Message text
SEL
display.
SEL Press
Controls the ALERT LED and Audible Alarm
behavior. Both allows the LED and Tone. Tone
Both, Tone, Light, Off allows the audible alarm only. Light allows the LED
only. Off deactivates the ALERT LED and Audible
Alarm feature.
Key or Stlth Controls all radio beeps.
On or Off Controls key beeps.
Controls the backlight operation. On causes the
On, Stlth backlight to remain on all the time.
disables the backlight.
Controls what area is illuminated when the
backlight is on.
Both, LCD, Keybd
keypad,
(Keyboard) illuminates the keypad only.
Description
keys on 5-way
to send data using clone mode
SEL
Both illuminates the LCD and the
LCD illuminates the display only.
to
ENT
Stlth (Steath)
Keybd
Page 98