Audible Alarms And The Alert Led; Audible Alarm And Alert Led Settings - GRE 0716 Owner's Manual

to toggle Hit Counts on and off. When finished, press the
SAVE softkey to save your changes to the radio s configuration
memory.
You can view the hit counts for an object by navigating to the
object by pressing
navigate to the desired object, if necessary. Once you have
selected the desired object, press the EDIT softkey, then the
CURR softkey, and scroll to the Hit Count item bottom of the
object menu to view the hit counter.
To reset the hit counter for a single object, press the Dflt
softkey while the Hit Count item is selected in the object s
menu.
To clear all hit counters, press the
softkey. Use the
then press the
changes and exit the Global settings menu.

Audible Alarms and the ALERT LED

Your 0716 features a very powerful ALERT LED with Audible
Alarm capability that allows you to set different types of visual
and audible notifications for the different types of objects you
create.
You may have noticed that the menus for each object you create
include various settings for LED, Backlight and Alarm. You can
use these settings to design custom visual and/or audible alarms
that are triggered when activity is detected on the specified
Scannable Object.
NOTE: The Alert LED utilizes a special tri-color Light Emitting Diode module
NOTE: Slight variations to LED colors are a normal part of the

Audible Alarm and ALERT LED Settings

0716 User Manual
, then using the
PGM
key to scroll down to the Clear Hits item,
key. Press the SAVE softkey to save your
SEL
that mixes light from red, green and blue LED elements to produce
thousands of different colors. Eight pre-defined color settings are
available for use in object menus.
for "all colors off", or no Alert LED display.
manufacturing process. You may notice these variations when using
the White LED color setting (
one 0716 to another. You can compensate for these slight
variations by fine-tuning the RGB LED settings for each color. See
the COLOR settings in the GLOB menu in Detailed Menu Reference
section at the end of this manual.
keys to
key, then the GLOB
PGM
LED COLOR: 0 is normally used
LED COLOR: 0 ), or when comparing
Page 69