Operation; Understanding 3 Modes; Turning On The Scanner/Setting Volume And Squelch - GRE PSR-200U Owner's Manual

OPERATION

UNDERSTANDING 3 MODES

Your PSR-200U has three kinds of modes, and changes the mode by
pressing an orange key.
• Scan/Manual mode
• FM Radio mode
• Service Search mode
If you press SCAN (Orange) key, your PSR-200U scanner enters SCAN/
MANUAL mode. The SCAN/MANUAL mode is a mode to which the
programmed channel memory is scanned. Or you can manually tuning the
channel memory.
If you press FM RADIO (Orange) key, the scanner enters FM RADIO mode.
FM RADIO mode is a mode to receive FM broadcast. You can use tune
operation or manually FM-Radio channel selection.
If you press SRCH (Orange) key, the scanner enters Service Search mode.
The Service Search mode is a mode that searches for the preprogrammed
service search band.
TURNING ON THE SCANNER/SETTING VOLUME AND
SQUELCH
1. Turn SQUELCH until the indicator points to MIN before you turn on the
scanner.
2. To turn on the scanner, slide POWER to ON.
3. Turn VOLUME clockwise until you hear a hissing sound.
4. Turn SQUELCH clockwise, just until the hissing sound stops.
Notes:
• To listen to a weak or distant station, turn SQUELCH counterclockwise.
If reception is poor, turn SQUELCH clockwise to cut out weak
transmissions.
• If SQUELCH is adjusted so you always hear a hissing sound, the scanner
will not scan or search properly.
5. To turn off the scanner when you finish, slide POWER to OFF.
PSR200U-OM.indd 19
19
2010/02/22 16:24:43