Swpr Menu Reference - GRE 0716 Owner's Manual

SWPR Menu Reference

The SWPR menu is used when creating new Spectrum Sweeper
objects, or editing existing Spectrum Sweeper objects. All menus
are shown in the scanner s display as a three line window that
can be scrolled up or down to access the various different
parameters. The active parameter is always the middle
parameter and is indicated by a flashing ":". The entire SWPR
menu is shown below:
SWPR
Parameter
Scan Lists
Type
Sub-bands
Tag
L/Out
LED Mode
0716 User Manual
Options
On or Off for Scan Lists
1-20
All Bands or Pub Safety
, SEL
Alpha-numeric text
On or Off
Solid or Flash
Description
Sets membership in Scan Lists. Use
scroll through Scan Lists. Use
Scan List membership. A "
number indicates that the object is mapped to that
Scan List.
Use to select All Bands or Public Safety. All
Bands covers the entire frequency range of the
scanner. Public Safety covers frequency ranges
commonly used for public safety communications.
Sub bands are available when using SWPR in All
Bands or Public Safety mode. In All Bands, the
sub bands are defined as follows:
0: 25-54 MHz
1: 108-137 MHz
2: 137-174 MHz
3: 216-300 MHz
4: 300-406 MHz
5: 406-470 MHz
6: 470-512 MHz
7: 764-806 MHz
8: 806-869 MHz
9: 896-1300 MHz
In Public Safety, the sub bands are defined as
follows:
0: 33.4-46.5 MHz
1: 151-170 MHz
2: 453-467 MHz
3: 764-806 MHz
4: 851-869 MHz
The alphanumeric display name for the SWPR
object. Use the standard text entry method or
QTXT to name the object.
Permanent lockout for the SWPR search. Also
accessed by pressing
FUNC L/OUT
scanner is stopped on the SWPR object.
Controls whether the ALERT LED flashes or
remains on solid when the ALERT LED is used.
keys to
key to toggle
SEL
*
" next to the Scan List
while the
Page 111