Enabling And Disabling Scan Lists - GRE 0716 Owner's Manual

object is mapped to, and without limitation to the number of
objects that are mapped to a given Scan List.
To change Scan List membership for an existing object, press
the
pad to scroll to the existing object that you wish to change, then
press the EDIT softkey. Press the CURR softkey to edit the
current object.
NOTE: Remember, when browsing objects in Manual or Program Mode, the
Scroll down in the object s parameters menu to the Scan
Lists: field. With the Scan Lists: field highlighted, use the
on the 5-way pushbutton pad to scroll through the Scan Lists,
and use the
or off. The asterisk (*) next to the Scan List number indicates
that the object is a member of that Scan List. Press the Save
softkey to save the modified object.

Enabling and disabling Scan Lists

Scan Lists may be enabled or disabled while actively scanning,
or by accessing the individual Scan List in the Global Settings
(GLOB) menu.
To toggle a Scan List s enabled/disabled status while scanning,
press the numeric key that corresponds with the Scan List you
wish to toggle. For example, pressing
toggle the state of Scan List 04 from enabled to disabled, or vice
versa if the Scan List is already disabled. To toggle the enabled/
disabled status for Scan Lists 11-20, press
number key, i.e., press
13. If you enable a Scan List that has no assigned objects, the
number for that Scan List will flash in the display while the
scanner is scanning.
0716 User Manual
key. Use the
PGM
arrow keys on the 5-way pushbutton pad operate as follows:
: navigates "up" through the objects assigned to the
current Scan List
: navigates "down" through the objects assigned to the
current Scan List
: navigates "up" through the active Scan Lists in the radio
: navigates "down" through the active Scan Lists in the
radio
button to toggle membership for a Scan List on
SEL
FUNC 3
keys on the 5-way pushbutton
while scanning will
4
, then press a
FUNC
to toggle the status of Scan List
Page 57