Viewing And Editing Classifier Configuration Summary - ZyXEL Communications XS1930-12HP User Manual

21.3.1 Viewing and Editing Classifier Configuration Summary

To view a summary of the classifier configuration, scroll down to the summary table at the bottom of the
Classifier screen. To change the settings of a rule, click a number in the Index field.
Note: When two rules conflict with each other, a higher layer rule has priority over lower layer
rule.
Figure 132 Advanced Application > Classifier > Classifier Configuration: Summary Table
The following table describes the labels in this screen.
Table 83 Advanced Application > Classifier > Classifier Configuration: Summary Table
LABEL
Index
Active
Weight
Name
Rule
Delete
Cancel
The following table shows some other common Ethernet types and the corresponding protocol number.
Table 84 Common Ethernet Types and Protocol Numbers
ETHERNET TYPE
IP ETHII
X.75 Internet
NBS Internet
ECMA Internet
Chaosnet
X.25 Level 3
XNS Compat
Banyan Systems
BBN Simnet
IBM SNA
AppleTalk AARP
Chapter 21 Classifier
DESCRIPTION
This field displays the index number of the rule. Click an index number to edit the rule.
This field displays Yes when the rule is activated and No when it is deactivated.
The field displays the priority of the rule when the match order is in manual mode. A higher weight
means a higher priority.
This field displays the descriptive name for this rule. This is for identification purpose only.
This field displays a summary of the classifier rule's settings.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the table
heading row to select all entries.
Click Delete to remove the selected entry from the summary table.
Click Cancel to clear the check boxes.
PROTOCOL NUMBER
0800
0801
0802
0803
0804
0805
0807
0BAD
5208
80D5
80F3
XS1930 Series User's Guide
184