ZyXEL Communications XS1930-12HP User Manual page 80

Figure 56 Basic Setting > System Info
The following table describes the labels in this screen.
Table 23 Basic Setting > System Info
LABEL DESCRIPTION
System Name This field displays the descriptive name of the Switch for identification purposes.
Product Model This field displays the product model of the Switch. Use this information when searching for
firmware upgrade or looking for other support information in the website.
ZyNOS F/W This field displays the version number of the Switch 's current firmware including the date created.
Version
Ethernet This field refers to the Ethernet MAC (Media Access Control) address of the Switch.
Address
CPU Utilization CPU utilization quantifies how busy the system is. Current (%) displays the current percentage of
CPU utilization.
Memory Memory utilization shows how much DRAM memory is available and in use. It also displays the
Utilization current percentage of memory utilization.
Name This field displays the name of memory pool.
Total (byte) This field displays the total number of bytes in this memory pool.
Used (byte) This field displays the number of bytes being used in this memory pool.
Utilization This field displays the percentage (%) of memory being used in this memory pool.
(%)
Hardware Monitor
Temperature The Switch has temperature sensors that are capable of detecting and reporting if the
Unit temperature rises above the threshold. You may choose the temperature unit (Centigrade or
Fahrenheit) in this field.
Temperature BOARD, MAC and PHY refer to the location of the temperature sensors on the Switch printed
(C) circuit board.
Chapter 8 Basic Setting
XS1930 Series User's Guide
80