Figure 106 Advanced Application > Spanning Tree Protocol > MSTP
The following table describes the labels in this screen.
Table 65 Advanced Application > Spanning Tree Protocol > MSTP
LABEL
DESCRIPTION
Status
Click Status to display the MSTP Status screen (see
Port
Click Port to display the MSTP Port screen (see
Active
Select this to activate MSTP on the Switch. Clear this to disable MSTP on the Switch.
Note: You must also activate Multiple Spanning Tree in the Advanced Application >
Chapter 13 Spanning Tree Protocol
Spanning Tree Protocol > Configuration screen to enable MSTP on the Switch.
XS1930 Series User's Guide
145
Figure 108 on page
149).
Figure 107 on page
147).