ZyXEL Communications XS1930-12HP User Manual page 99

Figure 70 Basic Setting > IPv6 > IPv6 Interface Status
The following table describes the labels in this screen.
Table 36 Basic Setting > IPv6 > IPv6 Interface Status
LABEL DESCRIPTION
IPv6 Active This field displays whether the IPv6 interface is activated or not.
MTU Size This field displays the Maximum Transmission Unit (MTU) size for IPv6 packets on this interface.
ICMPv6 Rate This field displays the maximum number of ICMPv6 error messages which are allowed to transmit
Limit Bucket in a given time interval. If the bucket is full, subsequent error messages are suppressed.
Size
ICMPv6 Rate This field displays the time period (in milliseconds) during which ICMPv6 error messages of up to
Limit Error the bucket size can be transmitted. 0 means no limit.
Interval
Link Local This field displays the Switch's link-local IP address and prefix generated by the interface. It also
Address shows whether the IP address is preferred, which means it is a valid address and can be used as a
sender or receiver address.
Global Unicast This field displays the Switch's global unicast address to identify this interface.
Address(es)
Joined Group This field displays the IPv6 multicast addresses of groups the Switch's interface joins.
Address(es)
ND DAD Active This field displays whether Neighbor Discovery (ND) Duplicate Address Detection (DAD) is
enabled on the interface.
Chapter 8 Basic Setting
XS1930 Series User's Guide
99