Table of Contents
Advertisement
Figure 38 Wizard > Protection > Step 3 Summary
Each field is described in the following table.
Table 15 Wizard > Protection > Step 3 Summary
LABEL
Summary
Loop Guard
Broadcast Storm
Control
Previous
Finish
Cancel
4.4.3 VLAN
In VLAN, you can create VLAN, and tag VLAN settings.
Click Wizard > VLAN > VLAN Setting to access this screen.
Chapter 4 The Web Configurator
DESCRIPTION
If the loop guard feature is enabled on a port, the Switch will prevent loops on this port.
If the broadcast storm control feature is enabled on a port, the number of broadcast
packets the Switch receives per second will be limited on this port.
Click Previous to show the previous screen.
Review the information and click Finish to create the task.
Click Cancel to exit this screen without saving.
XS1930 Series User's Guide
55
Advertisement
Table of Contents
Troubleshooting
