Accident Prevention; Function Control; General; Hydraulic - probst HVZ-UNI-II Operating Instructions Manual

Safety
2.7

Accident prevention

●
The workplace has to be covered for unauthorized persons, especially children.
●
Take care in case of thunderstorm!
●
The workplace has to be sufficiently illuminated.
●
Take care with handling wet, dirty and not solidified components.
●
The working with the device in case of atmospheric editions under 3° C (37,5° F) is forbidden!
Because the goods could be fall down caused by dampness or freezing.
2.8

Function Control

2.8.1

General

●
Before using the device check the functions and the working condition.
●
Maintenance and lubrication are only permitted when device is shut down!
●
Do not use the device, until all faults which can cause safety hazards are removed.
●
If there are any cracks, splits or damaged parts on any parts of the device, immediately stop using it.
●
The operating instructions must be available at the workplace every time.
●
Do not remove the type plate of the machine.
●
Unrecognisable information signs (such as regulatory or prohibition signs) must be replaced.
2.8.2

Hydraulic

●
Check all hydraulic hoses and connection for tightness. Only experts are allowed to replace faulty parts
(depressurized)
●
Ensure a clean working environment before opening the hydraulic connection.
●
The hydraulic hoses must be free of breaks and abrasion. Take care that there are no outstanding edges,
where the hoses could hook in.
The operator of the device is responsible for a constant line pressure, which is necessary for the working with
this device.
Only under these conditions is a safety gripping, lifting and transporting of the gripping goods with this
device ensured.
7 / 41