Adjustment Main Clamping; Adjustment Of Main Clamping - Machine Side - probst HVZ-UNI-II Operating Instructions Manual

Adjustments
5.4

Adjustment main clamping

The main clamping may be closed, when the side clamping is opened (on top)!
Otherwise the main clamping and side clamping may be damaged!!!
5.4.1

Adjustment of main clamping - machine side

1
Fig. 3
Tubular box spanner
As main clamping is named the gripping direction
(operates with the single hydraulic cylinder) which
2
grippes and clamps the stone layer about the steel
lamellas.
●
●
●
●
Fig. 14
The paving package in gripping direction of the
main gripping is normally the smaller dimension (of
a rectangular laying unit).
Open up the anti-turn (locking) device (1).
Adjust at the threaded spindle (with the help of a
tubular box spanner), the opening width to the
necessary dimension (of the stone layer).
Fold down the anti-turn (locking) device (1).
Machine side
Fig. 15
20 / 41