Table of Contents
Advertisement
PTZ Control
This function is available only for the PTZ dome cameras or a box camera installed on a Pan/Tilt motor.
NOTE:
Some of the lens control functions are applicable to cameras equipped with motorized lens.
The PTZ control buttons may vary with camera model. For the PTZ control buttons that your camera supports,
see the Web interface.
PTZ Control Toolbar
Go to a preset
1.
On the Live View page, click Preset on the control panel.
2.
Click
for a preset. The PTZ camera goes to the selected preset.
Delete a preset
1.
On the Live View page, click Preset on the control panel.
2.
Click
for a preset and then confirm the delete.
1. Adjust camera zoom.
2. Adjust camera focus.
3. Select a preset and then click
preset, click
. To delete a preset, click
47
. The camera goes to the selected preset. To add a
.
Advertisement
Table of Contents
