Sd Card; Camera Control Methods And System Configurations - Bolin Technology BC-7-M-12262019 User Manual

SD Card

Micro SD card can be inserted to the camera for local recording.

Ensure that the Micro SD card's pins are faced downward (logo faced
up)

Slide the card into the slot, and click into place

To remove the card, click inward, and it will pop outward and may be
removed

See Manual part 2 for more information regarding SD recording
Currently, the following Micro SD cards are supported:
Camera Initial setting status Information
Information of the camera initial setting status will display for 5 seconds.
1. Camera PELCO ID for RS-485 control
2. Camera ID for IR Remote Controller
3. IR remote control signal receive current setting
4. Baud Rate current setting
5. Control COMM Port current setting
6. HDMI video format current setting
7. SDI video format current setting
8. HDMI current setting
9. Model number
10. Firmware version

Camera Control Methods and System Configurations

This unit has multiple ways of controlling the camera and various system configuration capabilities using optional
products. This section describes the ways of controlling and typical system examples with the required components and
usage of each system.
1. Use the Infrared Remote Controller
2. Use RS-232 (VISCA)
3. Use RS-422/485 (VISCA/PELCO P/D)
4. IP Control (See Network Camera User Manual Part Two)
5. Use HDBaseT One-Cable control
Camera Status Info Display
PELCO ID
IR ID
IR-RECEIVE
BAUD RATE
COMM TYPE
HDMI FMT
SDI FMT
HDMI OUT
MODEL TYPE
SV:
15
001
01
ON
9600
232
2160P29.97
1080P59.94
RGB
----
V0B100B320401A002