Ir Remote Control - Bolin Technology D Series User Manual

1 Menu - On Screen Display (OSD) ON/OFF
13. AI only active when AI button is activated.
o
Press the AI
D
activated) and use the # 2 (I) and 3 (III) to adjust
the fan speed of the camera.
14 Power: Press and hold for 3 seconds.to turn the camera
ON /OFF.
o
Power OFF the camera is on standby mode.
o
When the camera is ON, the lens is turned to the
front.
o
When the camera is OFF, the lens is turned to
the back (standby mode).
o
Powering the camera ON/OFF will restart the
camera.
2.IR ID Selector up to 3 cameras can be controlled
Flo
15 Fn button: Press and hold and press any of the function
buttons in brown below
4 Use number 1 through 9 to save and recall a Preset or
Reset saved parameters.
6 Preset: Make parameter adjustments. Press and hold the
Preset button and select a # (1 through 9) to store the
selected parameters.
7 Slow Zoom control and 8 Auto Framing (not activated)
16 Reset: Press and hold the Reset button and press the
preset # (1 through 9) you wish to cancel.
17 Fast Zoom control.18 One Push AF: Press once to
activate (Auto-Focus).
9 Direction Control: Pan and Tilt and OSD navigation
HOME button confirm / Enter selection.
10 Focus: Manual Focus: Use the
Auto: Auto-Focus
11 Select a function in red (highlighted when selected) and
–
use the + and buttons (5) to adjust the selected function.
o
Gain: Image gain settings
o
Color: Image color saturation settings
o
Black.L: Image Black Level settings
o
WB.R: Image White Balance Red settings
o
PT.S: Pan/Tilt Speed settings
o
Zoom S: Zoom Speed settings.
o
Preset S: Preset Speed settings.
o
WB.B: Image White Balance Blue settings
o
WDR: Wide Dynamic Range settings
o
Freeze: To get a frozen image.
o
B Light: Back Light compensation
o
OPW: One Push White Balance
12 Resolution (Video Format Switching): Press and hold the
restart after the video format is changed and the screen will turn black for a few seconds.

IR Remote Control

button to turn it on (highlighted when
(STD, REV, Scan, etc.)
Far and Near
Note: AAA Batteries are not included with the remote control.
buttons.
Fn button (#15) until format change. The camera will
12