Tcp/Ip Configuration For Windows 7 Or Windows 8; Tcp/Ip Configuration For Macos X - Arris Touchstone TG2492S/CE User Manual

TCP/IP Configuration for Windows 7 or Windows 8

Follow these steps to configure the Ethernet interface on a Windows 7 or Windows 8
operating system.
1. Open the Windows Control Panel.
Network and Internet
2. Click
Network and Sharing Center
3. Click
Local Area Connection
4. Click
Properties
5. Click
Internet Protocol Version 4 (TCP/IPv4)
6. Select
Note: If your cable provider requires TCP/IP version 6, select
and click
The TCP/IP properties window for the version you selected displays.
7. For either TCP/IPv4 or TCP/IPv6, select
server address automatically
OK
8. Click
back out of the remaining setup screens.

TCP/IP Configuration for MacOS X

Follow these steps to configure the Ethernet interface on a MacOS X operating system.
1. Open System Preferences, either by choosing
by clicking the System Preferences icon in the dock.
2. Click the
3. Choose
menu.
4. Choose the TCP/IP tab, if necessary.
If you are using TCP/IPv4, go to step 5.
If your cable provider requires TCP/IPv6, go to step 8.
5. Choose
6. If necessary, click the
7. Close the System Properties application.
TCP/IPv4 configuration is completed.
8. If you are using TCP/IPv6, click
9. Choose
10. Close the System Properties application.
Release 24 STANDARD 1.1 March 2015
Copyright ARRIS Enterprises, Inc. 2015. All Rights Reserved.
.
.
to open the Status window.
to open the Properties window.
Properties
to configure TCP/IPv6.
, unless instructed otherwise by your cable provider.
to accept the new settings and close the Properties window. Then click
Network
icon.
Automatic
from the Location drop-down menu, and
Using DHCP
from the Configure IPv4 menu.
Renew DHCP Lease
Automatically
from the Configure IPv6 drop-down menu and click
Chapter 5: Configuring Your Ethernet Connection
Properties
and click
Obtain an IP address automatically
System Preferences
button.
Configure IPv6
near the bottom of the previous window.
Touchstone TG2492 Telephony Gateway User Guide 30
to configure TCP/IPv4.
Internet Protocol Version 6 (TCP/IPv6)
Obtain DNS
and
from the Apple menu or
Built-in Ethernet
from the Show
OK
.
Close
to