Tcp/Ip Configuration For Windows Vista; Tcp/Ip Configuration For Windows 7 Or Windows 8 - Arris Touchstone DG1680 User Manual

2. Double-click the local area connection to be used for your device's network connection.
The Local Area Connection Status widow displays.
Properties
3. Click
TCP/IP
4. Select
5. Click the
OK
6. Click
7. You may have to restart your computer in order for your computer to obtain a new IP
address from the network.

TCP/IP Configuration for Windows Vista

Follow these steps to configure the Ethernet interface on a Windows Vista operating
system.
1. Open the Vista Control Panel.
2. Double-click
Window.
Manage network connections
3. Click
The Network Connections window displays.
4. Double-click the
Note: If Windows requests permission to continue, click Continue.
5. Double-click
Note: If your cable provider requires TCP/IP version 6, double-click
Version 6 (TCP/IPv6)
The TCP/IP properties window for the version you selected displays.
6. For either TCP/IPv4 or TCP/IPv6, select
server address automatically
OK
7. Click

TCP/IP Configuration for Windows 7 or Windows 8

Follow these steps to configure the Ethernet interface on a Windows 7 or Windows 8
operating system.
1. Open the Windows Control Panel.
2. Click Network and Internet
Network and Sharing Center
3. Click
Local Area Connection
4. Click
Release 16 STANDARD 1.3 March 2015
.
by clicking it one time. Then click
General
tab. Then click
to accept the new settings, and
Network and Sharing Center
. If prompted for a connection, choose
Local Area Connection
Internet Protocol Version 4 (TCP/IPv4)
to configure TCP/IPv6.
, unless instructed otherwise by your cable provider.
to accept the new settings and close the Properties window.
.
.
to open the Status window.
Chapter 5: Configuring Your Ethernet Connection
Properties
Obtain an IP address automatically
OK
again to close the Properties window.
to display the Network and Sharing Center
to open the Properties window:
to configure TCP/IPv4.
Obtain an IP address automatically
Touchstone DG1680 Data Gateway User Guide 27
.
OK
and click .
Local Area Connection
Internet Protocol
Obtain DNS
and
.