Tcp/Ip Configuration For Windows Vista - Arris Touchstone TG2492S/CE User Manual

Telephony gateway
Table of Contents

Advertisement

materials on Windows XP for installation instructions. Once installed and enabled, follow
this same configuration example, but select TCP/IPv6 at the appropriate step.
1. From the computer, select
in the Control Panel.
The Network Connection window displays a list of LAN connections and associated network
adapters.
2. Double-click the local area connection to be used for your device's network connection.
The Local Area Connection Status widow displays.
Properties
3. Click
TCP/IP
4. Select
5. Click the
OK
6. Click
7. You may have to restart your computer in order for your computer to obtain a new IP
address from the network.

TCP/IP Configuration for Windows Vista

Follow these steps to configure the Ethernet interface on a Windows Vista operating
system.
1. Open the Vista Control Panel.
2. Double-click
Window.
Manage network connections
3. Click
The Network Connections window displays.
4. Double-click the
Note: If Windows requests permission to continue, click Continue.
5. Double-click
Note: If your cable provider requires TCP/IP version 6, double-click
(TCP/IPv6)
The TCP/IP properties window for the version you selected displays.
6. For either TCP/IPv4 or TCP/IPv6, select
server address automatically
OK
7. Click
Release 24 STANDARD 1.1 March 2015
Copyright ARRIS Enterprises, Inc. 2015. All Rights Reserved.
Start > Settings > Control Panel
.
by clicking it one time. Then click
General
tab. Then click
to accept the new settings, and
Network and Sharing Center
. If prompted for a connection, choose
Local Area Connection
Internet Protocol Version 4 (TCP/IPv4)
to configure TCP/IPv6.
, unless instructed otherwise by your cable provider.
to accept the new settings and close the Properties window.
Chapter 5: Configuring Your Ethernet Connection
Properties
Obtain an IP address automatically
OK
again to close the Properties window.
to display the Network and Sharing Center
to open the Properties window:
to configure TCP/IPv4.
Obtain an IP address automatically
Touchstone TG2492 Telephony Gateway User Guide 29
Network Connections
and double-click
.
OK
and click
.
Local Area Connection
Internet Protocol Version 6
and
.
Obtain DNS

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Touchstone tg2492

Table of Contents