Table of Contents
Advertisement
5. Double-click
Note: If your cable provider requires TCP/IP version 6, double-click
Version 6 (TCP/IPv6)
The TCP/IP properties window for the version you selected displays.
6. For either TCP/IPv4 or TCP/IPv6, select
DNS server address
7. Click
OK
TCP/IP Configuration for Windows 7, Windows 8,
or Windows 10
Follow these steps to configure the Ethernet interface on a Windows 7, Windows 8, or
Windows 10 operating system.
1. Click the
2. Select
Network and Sharing Center
3. Click
Change adapter settings
4. Right-click on your local area connection icon and select
window.
5. Select
Internet Protocol Version 4 (TCP/IPv4)
Note: If your cable provider requires TCP/IP version 6, select
(TCP/IPv6)
The TCP/IP properties window for the version you selected displays.
6. For either TCP/IPv4 or TCP/IPv6, select
DNS server address
7. Click
OK
back out of the remaining setup screens.
TCP/IP Configuration for Mac OS X
Follow these steps to configure the Ethernet interface on a Mac OS X operating system.
1. Open System Preferences, either by choosing
by clicking the System Preferences icon in the dock.
2. Click the
3. Choose
Show menu.
4. Choose the TCP/IP tab, if necessary.
Release 34 DRAFT 1.0 July 2016
© 2016 ARRIS Enterprises LLC. All Rights Reserved.
Internet Protocol Version 4 (TCP/IPv4)
to configure TCP/IPv6.
automatically, unless instructed otherwise by your cable provider.
to accept the new settings and close the Properties window.
Start
menu and type
and click
Properties
automatically, unless instructed otherwise by your cable provider.
to accept the new settings and close the Properties window. Then click
Network
icon.
Automatic
from the Location drop-down menu, and
Chapter 4: Configuring Your Ethernet Connection
to configure TCP/IPv4.
Obtain an IP address automatically
network and sharing
into the Search box.
when it appears.
from the left-side menu.
and click
to configure TCP/IPv6.
Obtain an IP address automatically
System Preferences
Touchstone TG3482 Telephony Gateway User Guide
Internet Protocol
and
Properties
to open the Properties
Properties
to configure TCP/IPv4.
Internet Protocol Version 6
and
from the Apple menu or
Built-in Ethernet
Obtain
Obtain
Close
to
from the
26
Hide quick links:
Advertisement
Table of Contents
