Resetting The Router To Factory Defaults - Arris Touchstone TG2492S/CE User Manual

Resetting the Router to Factory Defaults

To reset the router to factory defaults, press and hold the Reset button (4) on the back of
the Telephony Gateway for more than fifteen seconds. This restores the wireless setup
configuration and router configuration parameters to the factory defaults. You may need to
do this if a misconfiguration has locked out all access.
Release 24 STANDARD 1.1 March 2015
Copyright ARRIS Enterprises, Inc. 2015. All Rights Reserved.
Chapter 6: Using the Telephony Gateway
Touchstone TG2492 Telephony Gateway User Guide 36