Configuring Your Ethernet Connection
If your computer is equipped with a LAN card providing an Ethernet connection, you may have
to configure your computer's TCP/IP settings. The steps that follow will guide you through
setting your computer's TCP/IP settings to work with the Telephony Gateway.
Requirements
Make sure you have the following before attempting to configure your Ethernet connection:
Computer with Ethernet interface
Ethernet cable (supplied)
IP address, subnet, gateway, and DNS information for installations not using DHCP
How to use this Chapter
The following list shows the procedures for modifying the TCP/IP settings on the computer.
The procedure is slightly different depending on the operating system that you are using.
Please ensure you are using the correct steps for the operating system on your computer.
Follow the links below for instructions to configure your Ethernet connection on your
operating system.
TCP/IP Configuration for Windows Vista
TCP/IP Configuration for Windows 7, Windows 8, or Windows 10
TCP/IP Configuration for Mac OS X
TCP/IP Configuration for Windows Vista
Follow these steps to configure the Ethernet interface on a Windows Vista operating system.
1. Open the Vista Control Panel.
2. Double-click
Window.
3. Click
Manage network
Connection.
The Network Connections window displays.
4. Double-click the
Note: If Windows requests permission to continue, click Continue.
Release 8 STANDARD 1.5 August 2016
© 2011-2016 ARRIS Enterprises LLC. All Rights Reserved.
(page 34)
Network and Sharing Center
connections. If prompted for a connection, choose
Local Area Connection
(page 33)
to display the Network and Sharing Center
to open the Properties window:
Touchstone TG862G Telephony Gateway User Guide
Chapter 6
(page 34)
Local Area
33