Mitsubishi Electric MR-J3-10B Instruction Manual page 54

3. SIGNALS AND WIRING
(3) Insertion of cable into 54928-0610
How to connect a cable to the servo amplifier power supply connector is shown below.
(a) When using the supplied cable connection lever
1) The servo amplifier is packed with the cable connection lever 54932-0000 (Molex).
www.DataSheet4U.com
2) Cable connection procedure
54927-0510 and 54928-0310 (Molex)
20.6
10
M X J
5 4 9 3 2
Cable connection lever
1) Attach the cable connection lever to the housing.
(Detachable)
2) Push the cable connection lever in the direction
of arrow.
3) Hold down the cable connection lever and insert
the cable in the direction of arrow.
4) Release the cable connection lever.
3 - 13
[Unit: mm]
4.9
3.4