Basic Configuration; General Configuration; Date And Time Configuration - Speco H16HRL User Manual

Device Management

11.2 Basic Configuration

11.2.1 General Configuration

Click StartSettingsSystemBasicGeneral Settings to go to the following interface. Set the device name, device No., language, video format
and main output. Enable or disable wizard, "Log In Automatically", "Log Out Automatically" (if checked, you can set the wait time), "App Live
Self-Adaption" and "Sequence Automatically" (if checked, you can set the wait time). Click "Apply" to save the settings.
Device Name: The name of the device. It may display on the client end or CMS that help user to recognize the device remotely.
Video Format: Two modes: PAL and NTSC. Select the video format according to the camera.
Sequence Automatically: Check it and set "wait time". The system will sequence automatically if it is not operated during the time you set.

11.2.2 Date and Time Configuration

Click StartSettingsSystemBasicDate and Time to go to the interface as shown below.
Set the system time, date format, time format and time zone of the DVR. The default time zone is filled in our default info. If the selected time zone
includes DST, the DST of the time zone will be checked by default. Click "Apply" to save the settings.
You can manually set the system time or synchronize system time with network through NTP.
Manual: select "Manual" in the "Synchronous" option and then click
NTP: select "NTP" in the "Synchronous" option and then enter the NTP server.
after the "System Time" option to set the system time.
75
DVR User Manual