Date/Time; Figure 9 : System - Date/Time Setup Screen - Speco D12LX Operation Instruction Manual

Date/Time

Highlight Date/Time and press the
Highlight the first box beside Date and press the
the Up and Down arrow buttons to change the number. Use the Left and Right arrow buttons to move between month,
date and year. Once you have the correct date, press the
Highlight the Format box beside Date and press the
the button to save your selected format.
Highlight the first box beside Time and press the
the Up and Down arrow buttons to change the number. Use the Left and Right arrow buttons to move between hour,
minutes and seconds. Once you have the correct time, press the
Highlight the Format box beside Time and press the
the button to save your selected format.
NOTE: The clock will not start running until you have highlighted Save and pressed the
Highlight the box beside Time Zone and press the
NOTE: The Time Zone can also be selected on the map below by pressing the Left and Right buttons or scrolling
the mouse wheel up and down.
Highlight Use Daylight Saving Time and press the
Highlighting Time Sync.... and pressing the
synchronization between the DVR and standard time servers that are available in most time zones and countries, or
between the DVR and another DVR.
Highlight the box beside Automatic Sync. and press the
button, and the Date/Time setup screen appears.
Figure 9 : System – Date/Time setup screen.
button. The individual sections of the date will highlight. Use
button.
button. Select from the three available date formats and press
button. The individual sections of the time will highlight. Use
button. Select from the three available time formats and press
button. Select your time zone from the list and press the
button. Pressing the
button displays the Time Sync. screen. You can set up time
button. This toggles between On and Off.
Digital Video Recorder
button.
button toggles between On and Off.
button.
button.
21