Gestetner DSc224 Network Manual page 122

Appendix
Note
❒ If DHCP is used to start from the network, the current WINS server ad-
dress is displayed. This address, however, is not displayed if DHCP is not
used.
❒ If the IP address obtained from DHCP differs from the WINS IP address,
the DHCP address is the valid address.
❖ ❖ ❖ ❖ Configuration
Use the set command to make WINS active or inactive.
msh> set wins {on|off}
• "on" means active and "off" means inactive.
❖ ❖ ❖ ❖ Address configuration
Use this command to configure a WINS server IP address.
msh> wins {primary|secondary} IP_address
Note
❒ Use the "primary" to configure a primary WINS server IP address.
❒ Use the "secondary" to configure a secondary WINS server IP address.
AutoNet
7
Use the set command to configure AutoNet.
Note
❒ For more information about AutoNet, see p.134 "Using AutoNet".
msh> set autonet {on|off}
• "on" means active and "off" means inactive.
Changing the password
Use the passwd command to change the remote maintenance password.
Important
❒ Be sure not to forget or lose the password.
Note
❒ The default password is "password".
A A A A
Type "passwd".
msh> passwd
B B B B
Type the current password.
Old password:
116