Configuring The Network Interface Board With A Web Browser - Gestetner DSc224 Network Manual

Appendix
Configuring the Network Interface Board
with a Web Browser
The Network Interface Board functions as a Web server in addition to allowing
a printer to function as a network printer. You can use a Web Browser to view
the printer status and configure the Network Interface Board.
Note
❒ When using the proxy server, you must set up the Web Browser.
❖ ❖ ❖ ❖ Configuring the machine
This requires the TCP/IP protocol to be installed. After the machine has been
configured to use the TCP/IP protocol, it will be possible to adjust the settings
using a Web Browser.
Reference
For more information about configuring the machine to use the TCP/IP
protocol, see the General Settings Guide.
❖ ❖ ❖ ❖ Operating system browser requirements
OS
Windows 95/98/Me
7
Windows 2000/XP
Windows NT 4.0
Mac OS 8.6 ∼ 9.1
Solaris 2.5/2.6/2.7/7/8
Limitation
❒ Sometimes after clicking [Back] , the previous page may not appear. In this
case, click [Refresh] or [Reload] .
❒ The text on the screen may disappear or be aligned incorrectly if the font
size settings of the browser are too large. It is recommended that you use
a font size equal to or smaller than "10 point" with Netscape Navigator,
and "Medium" or smaller with Internet Explorer.
❒ This machine information cannot reload automatically. Click [Reload] or
[Refresh] on the Web Browser when you want to reload this machine infor-
mation.
88
Browser
Microsoft Internet Explorer 4.01 or later
Netscape Navigator 4.06 or later