Windows 2000 Configuration; Configuring Windows 2000; Printing Without A Print Server; Printing With A Standard Tcp/Ip Port - Gestetner DSc224 Network Manual

2. Windows 2000 Configuration

Configuring Windows 2000

Printing without a Print Server

The following procedure describes how to configure Windows 2000 to use the
machine on a network without a Windows 2000 Server, Windows 2000 Profes-
sional, Windows XP, Windows NT Server, Windows NT Workstation or Net-
Ware based print server.
A A A A
Specify the protocol to use.
Consult your network administrator about which of the three protocols is ap-
propriate.
• TCP/IP
• IPP
• NetBEUI
B B B B
Configure the chosen protocol.
• See p.25 "Configuring TCP/IP and IPP for Printing".
• See p.26 "Configuring NetBEUI for Printing".
C C C C
Install the software and set the printer driver port.
• Install SmartNetMonitor for Client from the CD-ROM labeled "Printer
Drivers and Utilities". For more information about how to install the soft-
ware and how to specify the printer driver port, see the Printer Reference 1.

Printing with a Standard TCP/IP Port

The Standard TCP/IP port is standard to Windows 2000, enabling Peer-to-Peer
printing in a network environment.
For more information about Standard TCP/IP port settings, see Windows 2000
Help.
Note
❒ If a device model selection dialog box appears during the procedure to add
the standard TCP/IP port, select "RICOH Network Printer C Model".
23