Telnet; Settings That Can Be Used With Postscript 3 - Gestetner DSm755 Printer Reference

telnet

The following telnet can be used with the machine:
access, appletalk, authfree, autonet, bonjour (rendezvous), btconfig, device-
name, dhcp, diprint, dns, domainname, help, hostname, ifconfig, info, ipp, ipv6,
lpr, netware, passwd, prnlog, route, set, show, slp, smb, snmp, sntp, spoolsw,
sprint, ssdp, ssh, status, syslog, upnp, web, wiconfig, wins

Settings that can be used with PostScript 3

The following PostScript 3 settings can be used with the machine:
Note
❒ Depending on a type of printer drivers, different items may be displayed.
Settings
Collate:
Dithering:
Duplex:
Fit to Print Size:
Image Smoothing:
Input Tray:
Output Tray:
Resolution
Size:
Staple:
Edge Smoothing
Toner Saving
Type:
Paper Selection
Punch:
Selectable Items
Off, On
Auto, Photographic, Text, User Setting
Off, Open to Left, Open to Top
Prompt User, Nearest Size and Scale, Nearest Size and Crop
Off, On, Auto, Less than 90 ppi, Less than 150 ppi, Less than
200 ppi, Less than 300 ppi
AutoSelect Tray, Bypass Tray, Tray 1(LCT), Tray 2, Tray 3,
Large Capacity Tray
Printer Default, Copy Tray, Finisher SR970/4000 Upper Tray,
Finisher SR970/4000 Shift Tray, Fnisher SR4000 Booklet Tray,
Finisher SR841 Upper Tray, Finisher SR841 Shift Tray, Booklet
Processor Tray, Mailbox Tray 1–9
600 dpi, 1200dpi
See General Setting Guide.
Off, Top Left, Top Right, 2 at Left, 2 at Right, 2 at Top, 2 at Center
On, Off
On, Off
See General Setting Guide.
Same Paper for All Pages, Different Paper for First Page, Use
Slip Sheet, Chaptering
Off, 2 at Left, 2 at Right, 2 at Top, 3 at Left, 3 at Right, 3 at Top,
4 at Left, 4 at Right, 4 at Top
List of the Setting Items
139
5