Gestetner DSc224 Network Manual page 132

Appendix
Message
Cannot find rprinter (<print server
name>/<printer number>)
Change IP address from DHCP Server.
child process exec error! (process name)
Connected DHCP Server(<DHCP server ad-
dress>).
connection from <IP address>
Could not attach to FileServer<error number> (In remote printer mode) Cannot attach to the
Could not attach to PServer<print server
name>
7
Current Interface Speed:xxxMbps
Current IP address <current IP address>
Current IPX address<IPX address>
DHCP lease time expired.
DHCP server not found.
dhcpcd start.
Duplicate IP=<IP address>(from <MAC ad-
dress>).
Established SPX Connection with PServer,
(RPSocket=<socket number>, connID=
<connection ID>)
exiting
126
Description and Solutions
(In remote printer mode) The printer having
the number displayed on the print server does
not exist. Make sure that the number of the
printer is registered in the print server.
The IP address changes when DHCP LEASE is
renewed. To always assign the same IP ad-
dress, set a static IP address to the DHCP serv-
er.
Failed to start the network service. Turn the
printer off and then on. If this does not work,
contact your service or sales representatives.
The IP address was successfully received from
the DHCP server.
Logged on from the host <IP address>.
file server. For some reason, the file server
refuses the connection. Check the file server
configuration.
(In remote printer mode) Cannot attach to the
print server. For some reason, the print server
refuses the connection. Check the print server
configuration.
The speed of the network (10 Mbps or 100 Mb-
ps).
The IP address <current IP address> was re-
ceived from the DHCP server.
The current IPX address.
DHCP lease time has expired. The printer tries
to discover the DHCP server again. The IP ad-
dress used up to now becomes invalid.
The DHCP server cannot be found. Make sure
the DHCP server is running on the network.
A dhcpcd (DHCP client server) has started.
The same IP address is used. An IP address
must be unique. Check the address of the de-
vice indicated in <MAC address>.
(In remote printer mode) A connection with
the print server has been established.
lpd service has ended and the system is exit-
ing the process.