Gestetner DSc224 Network Manual page 82

NetWare Configuration
M M M M
Assign print queues to the created printer as follows:
NetWare 3.x
A From [Print Server Configuration Menu], select [Queues Serviced By Printer].
B Select the printer created in step
C Press the { { { { INSERT} } } } key to select a queue serviced by the printer.
Note
❒ You can select more than one queue at a time.
D Follow the instructions on the screen to make other necessary settings.
When you have finished the above steps, make sure that the queues are as-
signed.
E Press the { { { { ESC} } } } key until "Exit?" appears, and then select [Yes] to exit
PCONSOLE.
F Start the print server by typing the following from the console of the
5
NetWare Server.
If it is running, restart it after exiting it.
❖ ❖ ❖ ❖ To exit
CAREE: unload pserver
❖ ❖ ❖ ❖ To start
CAREE: load pserver print_server_name
Note
❒ If the printer works as configured, "Waiting for job" appears.
❒ NetWare 3.x ends here.
NetWare 4.x, 5/5.1
A Click [Assignments], and then click [Add] in the [Assignments] group.
B In the [Available objects] box, click the queue created in step
click [OK].
C Click [Configuration], and in the [Printer type] box, select [Parallel] using the
drop-down menu, and then click [Communication].
D Click [Manual load] in the [Communication type] group, and then click [OK].
E After checking the settings, click [OK].
76
L L L L
.
K K K K
, and then