Installing Smartnetmonitor For Admin; Running The Nib Setup Tool - Gestetner DSc224 Network Manual

NetWare Configuration

Installing SmartNetMonitor for Admin

Install SmartNetMonitor for Admin on your computer. For the installation pro-
cedure, see "Installing the SmartNetMonitor for Client/Admin", Printer Refer-
ence 1.
After installing SmartNetMonitor for Admin, see one of the following sections:
• To configure the Network Interface Board as a NetWare print server for the
first time, see p.61 "Quick Setup Using the NIB Setup Tool Wizard".
• To use this computer with NetWare 3.x, 4.x, 5/5.1 as a print server, see p.64
"NetWare 3.x, 4.x, 5/5.1- Advanced Settings".
• To use this computer with NetWare 3.x, 4.x, 5/5.1 as a remote printer, see p.64
"NetWare 3.x, 4.x, 5/5.1- Advanced Settings".

Running the NIB Setup Tool

5
A A A A
Click [Start], point to [Programs], and then click [NIB Setup Tool] in the [Smart-
NetMonitor for Admin] program folder.
60